Security & automation · On-site across India
CCTV installation and biometric access control, specified honestly
Site survey, camera and NVR selection, biometric and RFID door control, attendance integration, remote viewing and post-installation service — with a bill of materials you can compare line by line.
In short
CCTV installation in India typically costs ₹2,000–₹5,000 per camera all-in — camera, installation and cabling — with a complete 4-camera setup landing between ₹15,000 and ₹50,000 depending on brand, resolution and site complexity. A DVR or NVR adds roughly ₹4,200–₹6,400, and cabling runs ₹30–₹50 per metre.
Biometric access control devices run ₹2,500–₹6,500 for basic fingerprint units, ₹6,500–₹12,000 for enterprise fingerprint readers and ₹8,000–₹25,000 for face recognition terminals, plus ₹1,500–₹6,000 for installation, cabling and UPS backup in year one. Every quote here follows a site survey, never a phone call.
CCTV & biometric access control at a glance
- CCTV installed cost
- ₹2,000–₹5,000 per camera · ₹15,000–₹50,000 for a 4-camera setup
- Recorder
- DVR/NVR ₹4,200–₹6,400 · storage sized to your retention requirement
- Cabling
- ₹30–₹50 per metre
- Biometric devices
- ₹2,500–₹6,500 fingerprint · ₹8,000–₹25,000 face recognition
- Brands
- Hikvision, CP Plus, Dahua, Axis, eSSL, Realtime — recommended on warranty and spares, not commission
- Quoting
- Only after a site survey with a coverage map and blind spots marked
- Coverage
- On-site across India — Bengaluru, Bhubaneswar, Cuttack, Rourkela, Sambalpur, Bhawanipatna
Sound familiar?
What you get
- Site survey with camera positions, coverage map and blind spots marked
- Itemised bill of materials — brand, model, warranty, no hidden markup
- IP or HD-analogue cameras, NVR/DVR, storage sized to your retention needs
- Biometric, RFID and PIN door access with anti-passback where needed
- Attendance data exported to your payroll or HR system
- Secure remote viewing on mobile, with hardened credentials
- Handover training, labelled cabling and a service schedule
How many cameras do you actually need?
This is the most-asked question and the one most often answered wrongly, because the honest answer comes from a survey rather than a phone call. What matters is which specific events you need to be able to prove afterwards — not a camera count that sounds reassuring.
As orientation only, here is what typical premises need. Your survey may differ, and if it does I will show you the coverage map that explains why.
| Premises | Typical cameras | Priority coverage |
|---|---|---|
| Small shop or clinic | 2–4 | Entrance, counter/cash point, stock area |
| Restaurant or showroom | 4–8 | Entry, till, kitchen or stores, customer floor, rear exit |
| Two-floor office | 8–16 | Reception, each floor corridor, server room, entry/exit doors, parking |
| School or campus | 16–40+ | Gates, corridors, labs, playground, perimeter, office |
| Factory or warehouse | 16–64+ | Gates, loading bays, production lines, stores, perimeter, weighbridge |
| Apartment complex | 16–48+ | Gates, lobbies, lifts, parking levels, perimeter, common areas |
Camera types, and where each one is worth the money
| Type | Use it for | Notes |
|---|---|---|
| HD analogue (HDTVI/CVI) | Budget upgrades reusing existing coaxial cable | Cheapest route when cabling already exists; limited resolution ceiling |
| IP / network camera | Most new installations | Higher resolution, PoE single-cable, better analytics; needs proper network design |
| Dome | Indoor areas, ceilings, discreet coverage | Vandal-resistant variants for public areas |
| Bullet | Perimeter, gates, car parks, long distance | Visible deterrent; check the IR range against the actual distance |
| PTZ | Large open areas with someone watching live | Pointless unattended — it records where it happens to be pointing |
| ANPR / number plate | Gate access, parking, logistics yards | Needs specific placement, lighting and lens; not a general camera |
| Face recognition | Access control and attendance | Regulatory and consent considerations apply |
Storage and retention — the part that ruins most installations
The single most common complaint I am called about is footage that has already been overwritten by the time anyone goes looking. Retention is arithmetic, not optimism: camera count × resolution × frame rate × compression × hours per day decides how many days you keep.
So the question is answered backwards. How many days must you be able to go back — 15, 30, 90? That, plus compliance requirements in your sector, determines the recorder and disk capacity. Buying a recorder first and discovering the retention afterwards is how you end up with seven days when you needed sixty.
- Retention target agreed in writing before hardware is chosen
- Surveillance-rated drives, which are built for continuous write unlike desktop disks
- H.265 compression where cameras support it, roughly halving storage for the same quality
- Motion-based or scheduled recording where continuous coverage is not required
- RAID or a second recorder where losing footage is genuinely unacceptable
- A monthly check that recording is actually happening — cameras fail silently
Biometric access control and attendance
Access control and attendance are usually bought together and should be designed together. The device is the cheap part; the design decisions that matter are what happens when it fails, who can override it, and where the data goes.
Fire safety comes first: doors need fail-safe or fail-secure behaviour chosen deliberately per door, with a manual release. A door that cannot open in a power cut is a legal problem, not a security feature.
- Fingerprint, face recognition, RFID card and PIN — combined where a single factor is not enough
- Anti-passback for gates and secure areas so one credential cannot admit a queue
- Fail-safe or fail-secure per door, with manual release and fire-alarm integration
- Attendance exported to your payroll or HR system rather than typed in by hand
- Shift rules, late marks and overtime configured to match your actual policy
- Visitor management with photo capture where reception needs it
- Consent and data-handling for biometric records explained and documented
Genuine hardware, and how to check a quote
Grey-market cameras are common, cheaper by a few hundred rupees per unit, and carry no warranty support when they fail in month fourteen. STQC-certified units typically cost ₹300–₹800 more per camera — worth it on any installation you intend to keep.
Every quote I issue lists brand, exact model number, quantity, unit price and warranty term for each line. That is not generosity; it is the only way you can compare two quotes honestly, including mine against someone else's.
Indicative pricing
What CCTV & biometric access control costs
Indicative Indian market ranges for 2026, published so you can sanity-check any quote — including mine. Your itemised bill of materials follows the site survey.
| Item | Indicative range | Notes |
|---|---|---|
| CCTV camera, installed | ₹2,000 – ₹5,000 per camera | Includes camera, installation and cabling; varies by resolution and brand |
| Complete 4-camera setup | ₹15,000 – ₹50,000 | CP Plus at the lower end, Hikvision and Dahua above it |
| DVR / NVR | ₹4,200 – ₹6,400 | Channel count and storage capacity drive the price |
| Cabling | ₹30 – ₹50 per metre | Route length and conduit access matter more than the cable itself |
| Fingerprint attendance device | ₹2,500 – ₹12,000 | ₹2,500–₹6,500 basic; ₹6,500–₹12,000 enterprise-grade |
| Face recognition terminal | ₹8,000 – ₹25,000 | Tablet form at the lower end, wall-mounted units above |
| Biometric install, cabling & UPS | ₹1,500 – ₹6,000 | Year-one commissioning cost per door |
| Annual maintenance (AMC) | ₹1,500 – ₹10,000 / year | From year two, per device, depending on coverage |
STQC-certified cameras cost ₹300–₹800 more per unit than grey-market equivalents and are what I quote by default — the warranty is the point. Site survey fee is credited against the installation if you proceed.
Tech stack
The exact platforms I build CCTV & biometric access control on.
Mainstream, well-supported products with real warranties and real communities — so your system stays maintainable long after the invoice is settled.
Hikvision
Dahua
Axis Communications
Synology
Ubiquiti UniFi
TP-Link
Raspberry Pi
MQTT
Zoho CRM
Android
iOS / App Store
Linux
Why clients pick me for this
Four promises, written into every CCTV & biometric access control contract.
Fixed price, no scope-creep billing
The quote you approve is the amount you pay. Anything extra is quoted and approved by you before a rupee is spent.
Milestone payments, not upfront risk
You pay against delivered stages. If a milestone is not signed off, the next one does not start.
Satisfaction sign-off before handover
Delivery closes only when you have tested it and confirmed it does what the scope said. Fixes inside that scope are free.
Support after the invoice is paid
A defined warranty period, then optional AMC. You call the person who built it — never a ticket queue.
How it runs
From your first message to signed-off delivery.
STEP 01
Site survey
Walk the premises, mark camera positions and blind spots, check cable routes, power and lighting.
STEP 02
Coverage map & itemised quote
A plan showing what each camera sees, plus a bill of materials with brand, model, warranty and unit price.
STEP 03
Install, configure, test
Cabling dressed and labelled, cameras aimed and focused, retention verified, remote viewing hardened.
STEP 04
Handover, training & AMC
Credentials in your name, staff trained on playback and export, plus an optional service schedule.
FAQ
CCTV & biometric access control — questions clients ask
How much does CCTV installation cost in India?
Typically ₹2,000–₹5,000 per camera all-in, covering the camera, installation and cabling. A complete 4-camera package runs ₹15,000–₹50,000 depending on brand and resolution — CP Plus sits at the lower end, Hikvision and Dahua above it. Add roughly ₹4,200–₹6,400 for the DVR or NVR and ₹30–₹50 per metre for cabling.
How many CCTV cameras do I need?
That comes from a survey, not a phone call. A small shop is usually covered by 2–4 cameras, a two-floor office by 8–16, a school or factory by 16 upwards. What matters is which events you need to be able to prove afterwards — entries, cash points, stores and blind corners almost always matter more than raw camera count.
Which CCTV brand is best — Hikvision, CP Plus or Dahua?
All three are credible. CP Plus is usually the value option, Hikvision has the strongest software and ecosystem, Dahua sits between them, and Axis is the premium choice for demanding sites. I recommend on warranty, spares availability and your budget — never on which brand pays the best margin.
How many days of footage will I have?
Retention is arithmetic: camera count, resolution, frame rate, compression and hours recorded determine it. We agree the retention target first — 15, 30 or 90 days — and size the recorder and disks to hit it. Discovering you have seven days when you needed sixty is the most common CCTV disappointment there is.
What does a biometric attendance system cost?
Basic fingerprint machines run ₹2,500–₹6,500 and enterprise fingerprint devices ₹6,500–₹12,000. Face recognition terminals cost ₹8,000–₹25,000 depending on capacity and build. Installation, cabling and UPS backup add ₹1,500–₹6,000 in year one, with ₹1,500–₹10,000 a year in maintenance from year two.
Can biometric attendance connect to our payroll?
Yes. Attendance data can be exported or synced into payroll and HR systems, with shift rules, late marks and overtime configured to match your actual policy rather than the device's defaults.
Is face recognition better than fingerprint?
It is faster, contactless and harder to share, which matters for hygiene and for buddy-punching. It also costs more, is more sensitive to lighting and positioning, and carries greater data-protection responsibility. Many sites do best with cards for volume and biometrics only on sensitive doors.
What happens to the doors during a power cut?
That is a design decision made per door — fail-safe doors unlock, fail-secure doors stay locked — with manual release and fire-alarm integration. Any access control installation that has not answered this question explicitly is unsafe.
Can I view the cameras on my phone?
Yes, with remote viewing configured and hardened: changed default credentials, strong passwords, current firmware, and no recorder exposed directly to the internet on a default port. A large share of camera systems worldwide are accessible to strangers for exactly those reasons.
Do you service what you install?
Yes, under an optional AMC with a defined response window, including quarterly health checks, lens cleaning, firmware updates and verification that recording and retention are actually working. Cameras fail silently, so scheduled checks matter more here than in most systems.
Do you work with genuine or grey-market hardware?
Genuine, STQC-certified where applicable, which costs ₹300–₹800 more per camera than grey-market units and comes with a warranty that will actually be honoured. Every line in the quote carries brand, model, quantity, unit price and warranty term so you can compare it against anyone else's.
Which areas do you cover for on-site work?
Bengaluru and across India, including Bhubaneswar, Cuttack, Rourkela, Sambalpur and Bhawanipatna. Site surveys are scheduled within a few working days and quoted after the walkthrough, usually within 48 hours.
Ready to get your CCTV & biometric access control done properly?
Send the requirement today and a written, itemised quote is in your inbox within 24 hours. If it is not the right fit, I will tell you that instead of selling you something.
100+ clients served·Free, no-obligation quote·NDA on request·You own everything at handover